The MaxxTow 2-Tang Clevis # MT70034 will allow you to attach your yard cart with the clevis to the Buyers Products Three Point Hitch Spreader Mount # 3373005345. This clevis is rated for up to 500lbs of tongue weight and up to 5,000lbs total trailer weight. You will need a Clevis Pin with Handle and Clip # C45803 if you do not already have one for your cart. view full answer...
We do have some options for you to tow a trailer with a clevis mount but the Buyers Products Adjustable Tri-Ball Mount # 3371802225 that you referenced doesn't have provisions for that.
Instead you can either use the Convert-A-Ball # CAB-6W which comes with 3 different hitch ball sizes plus the clevis or the Curt # C45008 which has 2 hitch balls and the clevis but you need a shank like part # C17100 to mount it to for adjustability.
Attached are some review videos for you to check out. view full answer...
The Dexter 2-Tang Clevis # T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches # MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount. So while the holes line up, the Clevis requires slightly larger pins so it's going to have some play.
While this will technically work, the larger pin holes mean they can get elongated over time so I recommend using the Replacement Shank for Curt Adjustable... view full answer...
While there are no clevis adapters with a 1" diameter hole, the 1-1/8" hole on the Clevis Adapter for B&W Tow & Stow 3" Ball Mounts # BWTS35300B will work just fine if you are towing at low speeds like a typical farm application.
If you do plan on towing a trailer with a clevis at higher speeds then it would be better to have one that matches with your 1" pin. We have a few different options here like combining the BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch # HD306 with... view full answer...
The Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch part # C60618 will require a 1/2" clevis hook to latch around the safety chain loops. Therefore, you'll likely have to upgrade both the safety chains and clevis hooks since you can't use larger clevis hooks with smaller safety chains. The Fulton Safety Chain with 1/2" Clevis Hook part # FCHA0070324 will work great for this setup. view full answer...
Yes the Demco 2-Tang Clevis - Adjustable Channel Mount - Black Paint - 20,000 lbs Item # DM12676-30 is compatible with the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch - 4" Drop/Rise - 14,000 lbs
Item # MD204 however, I recommended keeping manufacturers the same and going with the 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount - 1" Diameter Pin - 20,000 lbs Item # 358CLEVIS. Keep in mind, when towing, you don't want to exceed the lowest weight rating of the components... view full answer...
The Curt 81960 clevis hooks you referenced have a 1" opening, and the safety chain loops of Curt hitch # C15802 are approximately 1-1/8" wide so you would be able to use them, but the hooks would not quite close. For Curt clevis hooks with a larger opening there is the # C81970 which has a 1-1/3" opening, as well as the # C81980, which has an opening of 1-1/4".
I've added links to video reviews of these hooks for you to take a look at as well. view full answer...
We have 3 different adapters for a B&W Tow & Stow and it all just depends on the size of your hitch receiver:
2" - # BWTS35100B
2-1/2" - # BWTS35200B
3" - # BWTS35300B
These have 1-1/8" diameter holes for the clevis pin and will do just fine if you're going to be towing at slower speeds. If you will be towing at higher speeds then we'll want to get you something that has 1" diameter holes just to help eliminate play. For example, BulletProof Hitches has their 2-Tang Clevis # 358CLEVIS... view full answer...
To use the Gen-Y Horizontal Torsion Clevis and Pintle Hook Combo w/ 2-5/16" Ball # 325-GH-1124 in a pintle setup would require you to pull the ball up through the top of the clevis opening and then put the loop between the clevis and secure the ball back down through the loop. Essentially you'd be connecting the clevis to the pintle loop. view full answer...
Since we have the referenced hitch, Curt Class V XD Trailer Hitch Receiver # C15313, in stock in our warehouse I paid a visit there with the Laclede 3/8-inch Clevis Hook # 6495-401-04. This clevis hook easily fit the safety chain holes on the hitch and allowed the retainer to snap closed.
This clevis hook has a working load limit (WLL) of 5,400-lbs so a pair would offer enough capacity for all but the heaviest trailers. view full answer...
The Clevis mounts that are designed for your Wrangler depend on the size of the clevis.
If you have a 3/4 inch clevis the adapter is part # RM-035. If it measures 1-inch the adapter you need is part # RM-035-1.
These adapters will not work with the Stowmaster tow bar. The Stowmaster requires the horizontal bar, and the adapters will only work with motorhome mounted tow bars like the Falcon, part # RM-520, or the Sterling All Terrain, part # RM-576. view full answer...
As long as the channel on the tongue of your BanB industrial sprayer has a 3" wide channel and mounting holes that are 2" apart on center the Demco 2-Tang Clevis - Adjustable Channel Mount - Black Paint - 20,000 lbs # DM12676-30 would be a great option as its 20000lb weight capacity would be plenty for your 1000lb sprayer.
If you find the channel is a different dimension just let me know.
I included a diagram and video review of the # DM12676-30 for you to take a look at. view full answer...
As long as your trailer equipped with a lunette ring is within the 5,000 lb weight limit of the MaxxTow # MT70034 and your lunette ring fits within the tangs of the clevis hitch (see attached photos) you can definitely use this with a lunette ring. Please note that your lunette ring can't be more then 2-1/2" thick.
You will also need a hitch pin & clip like part # PC3 or a locking hitch pin like part # e98880, as well as the clevis pin itself like part # CP20. view full answer...
The Demco Adjustable Channel mount Clevis, part # DM12676-30 is compatible with the Curt One Mount Replacement Channel Mount Shank, part # C45910.
The inside dimension of the # C45910 channel mount is a little larger than 3 inches and the holes are 2 inches apart. The holes on the # DM12676-30 Demco Clevis are 1 inch apart so the channel mount will work just fine with the Clevis.
If you need locking hitch pins for the mount I recommend part # C23556. These locks measure 6-1/4 inches... view full answer...
I'm assuming you're speaking of the Curt 1-7/8 ball and Clevis Mount, part # C45005, is that correct? If you were to use the # C45005 in combination with the # HE18, you would indeed get 24 inches of extension, measured from the hitch pin hole in the receiver hitch o your EZ-GO cart tot he trailer ball on the # C45005. However, using the extension will lower the tongue weight capacity of the hitch by half.
I've provided a photo showing the dimensions of the two parts when used together. view full answer...
The shank of the B&W Tow & Stow 3-Ball Mount, part # BWTS10049B can be used with the Clevis Adapter, part # BWTS35100B you said you have and can also work with the pintle hook that is included with part # BWTS10056. The clevis adapter BWTS35100B cannot be modified to be used like the pintle hook since it cannot be used with a trailer hitch ball. I confirmed this with my contact at B&W.
The platform pointed out in the attached photo of the BWTS10056 can be removed and the BWTS10056 can... view full answer...
The clevis hook on the Tow Ready Safety Chain Kit part # 49150 is 5/16" diameter. Therefore if this hook will not work with the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch part # C60618 then you will want to move up to a 3/8" diameter clevis hook like the one included with the Buyers Products Trailer Safety Chain part # 337BSC3842. This clevis hook should be large enough to accommodate the safe chain loops on the above Curt Gooseneck Kit. You will need two of them... view full answer...
The Titan Chain Clevis Hook w/ Spring Loaded Latch part # TCSLIP-G70-10-L has a 1-1/16" hook opening so it should work just fine with the safety chain loops on a 2015 Chevrolet Silverado 2500 though we have not been able to test this for ourself. That said, all you need to do is measure the safety chain loops on your vehicle to determine compatibility. The Titan Chain Clevis Hook part # TCSLIP-G70-13-L is the largest we offer with a 1-1/4" opening. view full answer...
Yes, the Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts # BWTS35200B that you referenced does fit the 2-1/2 inch hitch versions of the B and W Tow and Stow Ball Mounts like the part # BWTS20056 that you referenced. view full answer...
The 10K Ball Mount Tongue for Brophy Adjustable Drop Hitch # RTB1 won't fit on a B&W Tow & Stow 2-Ball Mount like part # BWTS20040C because the brackets where it mounts are too narrow. The Tow & Stow opens up wider than the shank where the Brophy part has an opening the same size as the shank (which is for a 2").
The Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts # BWTS35200B will do just fine for most towing as the hole is only 1-1/8" in diameter. If you plan on traveling at higher... view full answer...
Go To Results